Juniper Compatible 10G LR SFP+ Transceiver Module 1310nm 10km

Juniper Compatible 10G LR SFP+ Transceiver Module 1310nm 10km

Juniper Networks EX-SFP-10GE-LR Compatible 10G LR SFP+ Transceiver

The Juniper Compatible LR optics is high performance and cost effective SFP+ LR transceiver. It supports data-rate of 10.3125Gbps (10GBASE-SR) over single-mode fiber cable. It is programmed to be compatible with a wide range of Juniper Switches, Routers and Ethernet Media Converters

Product Features

● Multi rate of up to 11.3Gb/s

● 1310nm DFB transmitter

● PIN Receiver

● Duplex LC connector

● Up to 10km on SMF

● < 1W Power Dissipation

● Digital Diagnostic Monitor Interface

● 10G Ethernet compliance or SDH/SONET

● 0℃ to +70℃ / -40~85℃ case operating temperature range

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Digital Diagnostic Specifications

The OLSP311XL-C(I)D10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Applications

● Widely used on 10G switches, routers, servers, NICs and other transmission equipment
● Suitable for data center, enterprise wiring closet, radio & baseband unit and other environments

● Other optical links

● 10G Ethernet

Compatibility

Olinkcom's Juniper Compatible 10GBASE-LR SFP+ transceiver can be worked with the below Juniper networks equipment.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.