RJ45 8P8C Cat5e UTP Gold Plated Modular Plug

RJ45 8P8C Cat5e UTP Gold Plated Modular Plug

PRODUCT FACT

The 8P8C (8 position 8 contact, also backronymed as 8 position 8 conductor; often called RJ45 ) plug is the male type of modular connector commonly used for Ethernet over twisted-pair applications, where the plug on each end terminated using the T568A or T568B pin/pair assignments that are defined in ANSI/TIA-568-C.2 standard.

These connectors are commonly used in computer networking and other telephone applications involving unshielded twisted-pair (UTP), shielded twisted-pair (STP), and multiconductor flat cable. Most network communications today are carried over Category 5e, Category 6 or Category 6A cable with an 8P8C modular plug crimped on each end.

§ SPECIFICATION

-Lead-free & RoHS compliant, certified by TUV.

-Meet the ANSI/TIA-568-C.2, ISO/IEC 2ndedition and CENELEC EN 50173-1 cabling requirements of IEC 60603-7 for RJ45 8-way connector.

ELECTRICAL

-Voltage proof: 1000V DC or AC peek, contact-to-contact.

-Current-carrying capacity: 0.75 Amps minimum

-Contact resistance: 20MΩ maximum

-Insulation resistance: 500MΩ minimum at 10V DC or 100 MΩ minimum at 500V DC

-Input to output resistance: 200MΩ maximum

-DC resistance: 0.2 ohm maximum

MECHANICAL

-Mechanical operation: 750 cycles minimum

-Effectiveness of connector coupling devices: 50 N (11 lbf) for 60s ± 5s

ENVIRONMENTAL

-Temperature: -10℃~60℃

-Humidity: 10%~90%RH

Over 30 Years of Experience
Cixi Anshi Communication Equipment has been specializing in jacks and connectors since 1986. We offer you more than 200 specifications in 10 categories, including fiber-optic distribution trays and splice closures, drop wire connectors, Cat5E and Cat6E patch cables, internet connectors, and distribution boxes. About 60% of our products are exported to Southeast Asia, Europe, the Middle East, Africa and the US.

One New Product Every Month
Our six R&D staff members use advanced testing equipment from the US. They use computer software such as AutoCAD, Pro/E, 3D MAX and Photoshop. They also develop one new product every month to meet your requirements.

OEM/ODM Orders Accepted
Now, we have more than 100 staff members and 20 of them are technicians at our 4,800 sqm factory. We have two production lines dedicated to processing your OEM/ODM orders, thus, we produce $200,000 worth of components every month.

Three Sections to Control Quality
Following ISO 9001:2000 guidelines, our quality control department includes QC, QE and QA sections. QA staff members check the quality of all raw and processed materials, while QE personnel are responsible for the related documents. QC staff members handle your requests and quality statistics, and make the corresponding improvements. We use materials from South Korea, the US and Taiwan to ensure quality. You can have confidence in ordering our CE-approved products.

Contact Us Today
Call us today for more information.