CCV Line Voltage XLPE Insulated Cables Extruder Machine

High Speed Ccv Line Voltage XLPE Insulated Cables Extruder Machine

Main features of machine

1. Voltage level XLPE 35-66-110-132KV

2. Conductor size :

(1) Copper: 50-1600 square mm

(2) Aluminum: 70-1600 square mm

3. Cable weight : 25kg/meter(max)

4. Cable diameter: 100mm (max)

5. thickness of each layers

(1) 80 extruder inside layer: 0.5-3.0mm

(2) 175 extruder insulation layer: 10.5-20mm

(3) 100 extruder outside layer: 0.5-3.0mm

6. Cross-linked closed length: 126 meters

(1) Heating section: 42 meters, 6m*7

(2) Pre-cooling section: 12 meters, 6m*2

(3) Water cooling section: 72 meters, 6m*12

7. Main building platform area (length * width): ≥24m×18 m

8. Host floor height: ≥21m

9. length of factory: ≥135m

10. Nitrogen :　 Pressure 2.0~2.5 MPa Purity 99.5%

　 Consumption : 0.4~1.8 m3 /h Nitrogen storage tank capacity 5 m3

11. Cooling water :　 pressure 0.2~2 MPa Circulation consumption 12.5m3 /h

12. Compressed air: pressure 0.6~0.8 MPa standard consumption 0.8 m3 /h

13. Installed capacity:　960 kVA

14. Two power supply lines: (3×240 mm2, 3×240 mm2)

Voltage class	XLPE 6-33 KV	35-132kv
Conductor cross section	Cu: 35-630 mm2 Al: 50-800 mm2	Cu: 50-1600 mm2, Al: 70-1600 mm2,
Max. Weight of cable	10 Kg/m	25 Kg/m
Outer diameter of cable	≤Φ75 mm	≤Φ90 mm
Wall thickness	Φ65 extruder 0.5-2.0 mm for inner layer Φ150 extruder 2.5-10.5 mm for insulation layer Φ90 extruder 0.5-2.0 mm for outer layer	Φ80 extruder 0.5-3.0 mm for inner layer Φ175 extruder 10.5-20 mm for insulation layer Φ100 extruder 0.5-3.0 mm for outer layer
Length of vulcanizing tube	≥102 m	≥114m
Heating section length	42 m, 6 m×6 sections	42 m, 6 m×6 sections
Pre-cooling section length	12 m, 6 m×2 sections	12 m, 6 m×2 sections
Water cooling length	54 m, 6 m×9sections	66 m, 6 m×11sections
Needed area of main platform (L×W)	≥24 m×18 m for one line *≥3024m for two lines**	≥24 m×18 m for one line *≥3024m for two lines**
Height of 3-platform	≥10 m	≥16.5m
Needed length of workshop (premises)	≥135 m	≥148m
Nitrogen gas	Pressure: 2.0-2.5 Mpa Purity: 99.5% Consumption :0.4-1.8 m3/h Volume of N2 tank: 5 m3	Pressure: 2.0-2.5 Mpa Purity: 99.5% Consumption: 4-8 m3/h Volume of N2 tank: 8 m3
Cooling water	Pressure :0. 2-2 MPa Consumption: 12.5 m3/h	Pressure :0.4-0.6 MPa Consumption:15 m3/h
Compressed air	Pressure: 0.6-0.8MPa Consumption: 0.8 m3/h	Pressure: 0.6-0.8MPa Consumption: 0.8 m3/h
Installed capacity	750kVA (Power voltage: 380V, 50HZ,	900kVA (Power voltage: 380V, 50HZ
Two power incoming lines	3185mm2, 3240mm2	3240mm2, 3240mm2

Product Tags:

Cables Extruder Machine CCV Line

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	YUYANG MACHINE Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!