Round Inlet Rotary Airlock Valve 25R/Min Impeller Feeder

Round Inlet Rotary Airlock Valve 25R/Min Impeller Feeder

The Impeller Feeder is a dust removal equipment for ash, wind and other feeding equipment for the main equipment, suitable for powder and granular materials, widely used in environmental protection, metallurgy, chemical, food, food and other industrial sectors. Our factory can also be designed and manufactured according to the requirements of users. (support coupling belt chain drive)

Characteristics of Impeller Feeder

YJD- B Rotary Air Lock Valve , as a special unloading equipment, plays an important role in cleaning and cleaning, so we summarize some of its characteristics, so that we can fully understand and maintain the star unloader and give full play to its ability.

The Rotary Air Lock Valve 's structure is compact, the shape is beautiful, and the use is convenient.The operation is stable and the noise is low.

Because the bearing and tooth box are some distance from the shell, the high temperature lubrication has been greatly improved.

Technical Datas of Impeller Feeder

YJD B Model Impeller Feeder Parameter

Working principle of Rotary Air Lock Valve Feeding Machine

The Rotary Air Lock Valve is mainly composed of shell, impeller and end cover. Reducer, transmission shaft, impeller as one, reliable, light and energy saving. Because the bearing and reducer of the Rotary Air Lock Valve are protruding outward, the phenomenon that dust can be squeezed into the bearing and large particle material can be avoided. When working, the deceleration motor drives the impeller to rotate through the coupling, the material in the upper part of the shell is brought evenly to the lower part, and the material is transported away by the next device.

Instructions for use of Impeller Feeder

1. Check whether the motor wiring is correct and reliable before use, and whether to install overload protection.

2. This product has been added No. 00 lithium grease before leaving the factory.

3. This product is suitable for powder dry materials and fine particle dry materials, such as high humidity and high viscosity materials, high temperature materials need to be customized separately.

4. The safety should be paid attention to when starting, and the hand should not be extended to the rotor part.