100M Ethernet Surge Protection Devices Low Output Residual Pressure Overvoltage Protection

100M Ethernet lightning protection control signal lightning protection network surge protection.

Brief introduction

The control signal network lightning protection dual one protector uses high quality low capacitance gas discharge tube, TVS and other devices. It has advantages of small insertion loss, fast response speed, accurate clamping, low output pressure and so on. It is used to protect all kinds of voltage connected control signals and network signal equipment sensitive to electromagnetic interference and protect sensitive control signal lines. The road is not damaged by lightning overvoltage, induced overvoltage, over current and electrostatic discharge.

Product features

1. multi-functional overvoltage protection, lightning and overpressure are no longer afraid of disasters.

2. the speed of response is 0.001 seconds, and the voltage is controlled in the range that the equipment can withstand.

3. low output residual pressure to further ensure safety

4. transmission performance, excellent insertion loss, high transmission frequency and low attenuation coefficient, ensure that the lightning arrester does not affect the system performance.

Product specification

Working principle of product

The signal surge protector is connected to the front end of the protected equipment. When the transmission line is impacted by the inductive thunder and other transient overvoltage, the impact current is discharged to the earth through the protection branch of the surge protector, and the output voltage is placed in the allowable voltage range of the equipment, thus ensuring the safety of the operating equipment.

Use of attention

1. when installing, attention should be paid to cables coming in and out of surge protective devices, so as to avoid the two coupling of surge.

2. the protected equipment must have good grounding, and the grounding impedance is in accordance with the relevant national standards.

3. After correct installation, it can work steadily for a long time. If it is found that the transmission performance of the system is reduced or the signal is interrupted due to the cause of surge protection, it should be maintained or replaced in time.

4. please recognize the interface and connection mode.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.