ISP4MC3 0.3kg 0.5kg 2kg 3kg Single Point Load Cell for electronic balance

Small Size Low Capacity Load Cell Shielded Connection Cable For Electronic Balance

Good quality and long life

Special features

− For determining small masses − Small size − Accuracy class C3 with OIML- R60 test report − Off center load compensated − Degree of protection IP65 according to IEC 529 − Shielded connection cable

Type		IPW4MC3
Order-No.		1-PW4C3/300G-1		1-PW4C3/500G-1		1-PW4C3/2KG-1		1-PW4C3/3KG-1
Accuracy class1)		C3
Number of load cell intervals (nLC)		3000
Maximum capacity (Emax)2))	g/kg	300	500		2		3
Minimum LC verification interval (vmin)	g	0.05	0.1		0.2		0.5
Temperature effect on zero balance (TK0)	% v. Cn / 10 K	0.0233	0.0280		0.0140		0.0233
Max. platform size	mm	800 x 800
Sensitivity (Cn)	mV/V	1.0±0.1				2.0±0.2
Zero balance		0±0.1
Temperature effect on sensitivity (TKC)3) Temperature range +20 ... +40℃ [+68 ... +104℉] −10 ... +20℃ [+14 ... +68℉]	% v. Cn / 10 K % of Cn	±0.0175 ±0.0117
Hysteresis error (dhy)3)		±0.0150
Non-linearity (dlin)3)		±0.0150
Minimum dead load output return (DR)	Ω	±0.0245
Off center load error4)		±0.0233
Input resistance (RLC)		380±38
Output resistance (R0)		380±38
Reference excitation voltage (Uref)	V	5
Nominal range of excitation voltage (BU)		15
Insulation resistance (Ris) at 100 VDC	GΩ	> 2
Nominal temp. range (BT)	°C [°F]	−10 ... +40 [+14 ... +104]
Service temp. range (Btu)		−10 ... +50 [+14 ... +122]
Storage temp. range (Btl)		−25 ... +70 [−13 ... +158]
load limit (EL ) at max. 100mm eccentricity	% of Emax % of Emax	150 100
Lateral load limit (Elq), static		200
Breaking load (Ed)		＞300
Deflection at Emax (snom), approx.	mm kg	< 0.4
Weight (G), approx.		0.07
Protection class according to EN 60 529 (IEC 529)		IP67
Material: Measuring element Coating Cable sheath		Aluminum Silicone rubber PVC

INNOVATION ELECTRONIC CO..,LTD Focus on Weighing and Static solution in Packing industry!

In the past tens of years, we established very good relationship with wide range of suppliers and customers in weighing and static products especially in packing industry and also investigated in our own factories of weighing and static, step by step, we get our own special advantages in this market: more accuracy and more economic weighing and static solution for you!

Our weighing solution mainly include:

1. all kinds of load cells( tension and compression load cell, s type load cell, single point load cell, shear beam load cell, those load cells are widely used in kinds of packing industry like food weighing and packing, cement weighing and packing, chemical dosing and packing, pharmaceutical dosing and packing, electronic balance, silo scale, truck scale, etc. )

2. High accuracy bench scale, floor scale, table scale, counting scale. They are widely used in kinds of places that need high accuracy weighing, like small bolts counting and packing, expensive powder and particles weighing and packing, sub-package system,etc.

3. Weighing equipment like dosing machine, checkweigher, roller conveyor scale, etc. This equipment are widely used in weighing and packing production line. The main use is to feed material of set quantity, and double check whether the weight is in the allowed range or not and eliminate the packages that not in allowed range.

The Static solution mainly include:

1. Static charging machine of 20KV, 30KV, 60KV, 100KV. They are wide used in packing material production line, like plastic film machine, bag making machine, IML labeling machine,side weld bag handles, shrink wrapping, electrostatic bonding, etc.

2. Static eliminators of 7.5KV, 6kv, AND anti-static bar,Ionizing air gun, Ionizing Air nozzle, Static foam, etc. These eliminators are widely used in static elimination before packing of finished products. It is to make the packing better, or to remove the dust on the surface of products.

If you have any weighing or static problem especially in packing industry, contact us, we are confident to provide you a suitable and economic Solution!