Precision Manual Metallurgical Sample Cutting Machine XCut-342 for Metal Section

Water Cooling Precision Manual Cutting Machine with Speed 2800rpm for Various Metals

Technical Data Download: iqualitrol Cutting Machine XCut-342

Brief Introduction:

iqualitrol XCut-342 Metallographic sample cutting machine is suitable for cutting various metal, non metal material in order to observe the metallographic, petrographic structure.

The machine has a cooling device. When using the configured cooling liquid, the heat may be taken away to avoid overheating. It is easy for the user to operate the machine. Therefore the machine is one of the equipments for samples in the factories, scientific research institution and colleges laboratory.

Technical Specifications:

Specimen Cutting Machine:

When cutting a specimen from a larger piece of material, care must be taken to ensure that it is representative of the features found in the larger sample, or that it contains all the information required to investigate a feature of interest.

One problem is that preparation of the specimen may change the microstructure of the material, for example through heating, chemical attack, or mechanical damage. The amount of damage depends on the method by which the specimen is cut and the material itself.

Cutting with abrasives may cause a high amount of damage, while the use of a low-speed diamond saw can lessen the problems. There are many different cutting methods, although some are used only for specific specimen types. iqualitrol provides the iCut-864 low speed diamond saw for cutting OM (optical microscope), SEM (scanning electron microscope), and even TEM (transmission electron microscope) specimen.

iqualitrol is a professional company to supply quality control instrument and repair service. The main products are industrial video borescope, hardness testers, metallographical instrument, metallurgical microscopes, temperature test chambers, etc.

These are widely used in machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, medical equipment, and so on.

Our sales and service staff are well trained and experienced. They can give professional advice to customers and recommend suitable equipment according to specific requirement.