Flash Memory IC Chip MT47H16M16BG-3 IT:B TR - Micron Technology - DDR2 SDRAM

Quick Detail:

DDR2 SDRAM

Description:

The DDR2 SDRAM uses a double data rate architecture to achieve high-speed operation. The double data rate architecture is essentially a 4n-prefetch architecture, with an interface designed to transfer two data words per clock cycle at the I/O balls. A single read or write access for the DDR2 SDRAM effectively consists of a single 4n-bit-wide, one-clock-cycle data transfer at the internal DRAM core and four corresponding n-bit-wide, one-half-clock-cycle data transfers at the I/O balls.

A bidirectional data strobe (DQS, DQS#) is transmitted externally, along with data, for use in data capture at the receiver. DQS is a strobe transmitted by the DDR2 SDRAM during READs and by the memory controller during WRITEs. DQS is edge-aligned with data for READs and center-aligned with data for WRITEs. The x16 offering has two data strobes, one for the lower byte (LDQS, LDQS#) and one for the upper byte (UDQS,UDQS#).

The DDR2 SDRAM operates from a differential clock (CK and CK#); the crossing of CK going HIGH and CK# going LOW will be referred to as the positive edge of CK. Commands (address and control signals) are registered at every positive edge of CK. Input data is registered on both edges of DQS, and output data is referenced to both edges of DQS as well as to both edges of CK.

Read and write accesses to the DDR2 SDRAM are burst-oriented; accesses start at a selected location and continue for a programmed number of locations in a programmed sequence. Accesses begin with the registration of an ACTIVATE command, which is then followed by a READ or WRITE command. The address bits registered coincident with the ACTIVATE command are used to select the bank and row to be accessed. The address bits registered coincident with the READ or WRITE command are used to selectthe bank and the starting column location for the burst access.

The DDR2 SDRAM provides for programmable read or write burst lengths of four or eight locations. DDR2 SDRAM supports interrupting a burst read of eight with another read or a burst write of eight with another write. An auto precharge function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst access.

As with standard DDR SDRAM, the pipelined, multibank architecture of DDR2 SDRAM enables concurrent operation, thereby providing high, effective bandwidth by hiding row precharge and activation time.

A self refresh mode is provided, along with a power-saving, power-down mode.

All inputs are compatible with the JEDEC standard for SSTL_18. All full drive-strength outputs are SSTL_18-compatible.

Applications:

VDD = 1.8V ±0.1V, V DDQ = 1.8V ±0.1V

JEDEC-standard 1.8V I/O (SSTL_18-compatible)

Differential data strobe (DQS, DQS#) option

4n-bit prefetch architecture

Duplicate output strobe (RDQS) option for x8

DLL to align DQ and DQS transitions with CK

4 internal banks for concurrent operation

Programmable CAS latency (CL)

Posted CAS additive latency (AL)

WRITE latency = READ latency - 1 tCK

Selectable burst lengths (BL): 4 or 8

Adjustable data-output drive strength

64ms, 8192-cycle refresh

On-die termination (ODT)

Industrial temperature (IT) option

Automotive temperature (AT) option

RoHS-compliant

Supports JEDEC clock jitter specification

Specifications:

Competitive Advantage:

warranty :180days for all goods

Free shipping:Order over $600 win a free shipment fee:goods weight below 3Kg.

Mega Source Electronics stocks components ready to ship. Hard to find, obsolete and highly allocated integrated circuits and semiconductors are all can be found by us.

Mega Source Electronics has established a well-developed logistics system and global logistics network, which can guarantee our service very quick, convenient and efficient.

Mega Source Elec. Limited is a leading independent electronic components supplier and distributor since 2004.Mega Source Elec. Limited has been specialized in providing Original Equipment Manufacturers (OEMs) and Contract Electronic Manufacturers (CEMs) which is hard to find, obsolete and hot sales integrated circuits ,semiconductors,LCD displays,power bank ect.

With years’ development, we have had developed a complete electronic components supply and distribute system.
Through our importing and exporting of components all around the world, Mega Source Elec. Limited can quickly feedback and satisfy customers’ need.
Besides, we have had gained a great reputation in domestic and international market for our experience and market insight, as well as our up-front, proactive, and responsive approach to service, adequate inventory and unwavering commitment to quality.

How Mega Source Elec. Makes A Difference In The Distribution Of Electronic Components 

Quality                                                                 Inventory

At the heart of Mega Source Elec. lies a commitment       Mega Source Electronics stocks components are

to total customer satisfaction with a secure quality           ready to be shipped.

system .We have professional testing facilities and          Hard-to-find,obsolete and high demand integrated 

and experienced QC& engineering team.With advanced  circuit & LCD display ect. can be found by us.

equipment and experienced industry experts, Mega        

Source Elec. is committed to fulfilling the needs of

our customers .                                                                     

Team                                                           Price

Our sales representatives, customer service agents,       We offer the most competitive price for you ,

quality inspectors and component engineers strive to      saving your purchasing cost.

Speed                                                           Environmental

Mega Source Electronics has established a well-               Our service is in strict compliance with global

developed logistics system and global logistics network,    environmental regulations and standards. We

which guarantees our service is very quick, convenient     resolve to fulfill social responsibility and pay

and efficient. attention to environmental protection.

Perfessional expert/import documentation work            Franchised distributor  

MEGA SOURCE TEAM 

More than 50 staff are in MEGA SOURCE.We are always here to fulfill your electronic components needs.

MEGA SOURCE BANK INFORMATION

• BANK NAME: HSBC HONGKONG

BENEFICIARY'S NAME: MEGA SOURCE ELEC.LIMITED

ACCOUNT: 509 744454 838 

SWIFT CODE: HSBCHKHHHKH

BANK ADD: 1 Queen’s Road Central ,Hong Kong

• PAYPAL

ACCOUNT :sales1@megasourceel.com 

• WESTERN UNION

ACCOUNT:JIAXIN ZHONG (Given name: JIAXIN, Family name: ZHONG)JIAXIN ZHONG (Given name: JIAXIN, Family name: ZHONG)

TEL：86-755-83695299

ADDRESS：22B FuHongGe, FuXing Garden Building, FuXing Rd, FuTian Dist. Shenzhen 518033