Anti Static Injection Molded Parts Plate Graphite Acrylic Filled PTFE Mould Sheets
PTFE sheet molded board, plate, Graphite acrylic Filled PTFE Mould Sheets Product Description PTFE panel (also called PTFE Sheet, board, plate) molding and turning points are two kinds of PTFE resin molded plate is made by molding method at room temperature molding, and then by sintering, cooling made. plastic materials PTFE resin cutting boards(PTFE......
Qingdao Global Sealing-tec co., Ltd
|
Carbon filled PTFE gasket sheet ring disc can band sinter piston for shock absorbers
...filled PTFE ring disc can band sinter piston used in shock absorbers Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) % 150 Working Temp. ℃ -180~260 Melting point ℃ 327 Produce Max Temp. ℃ 385 Size mm 20mm~400mm 1. Low water absorption 2. Corrosion resistance 3. Temperature resistance Description: PTFE......
Ningbo XiaYi Electromechanical Technology Co.,Ltd.
|
15% Glass Filled PTFE Tube
...Glass Filled PTFE Tube 15% Glass Filled PTFE tube reinforced with 15% glass fibres depending on the needs of the application. Glass fibre is used as a PTFE filler asit offers much improved compression and wear properties. The materialmay also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties) Advantages • Glass-filled...
Ningbo Kaxite Sealing Materials Co., Ltd.
|
High quality powder coating feed pump venturi,throat and sleeve,glass-filled PTFE 1085647
... for powder coating sapre parts. High quality powder coating feed pump venturi,throat and sleeve,glass-filled PTFE 1085647 Please note: this product is only the replacement,not original. But they are made of very high quality material, and they can work......
Hangzhou Easy Coating Equipment Co.,Ltd
|
Natural White Polytetrafluoroethylene PTFE / Glass Filled PTFE
... available Made of molding power Temperature : -180--260°c Stretch strength : >15Mpa Break elongation rate :200% Description: Molded PTFE sheet is manufactured by molding process with PTFE granular resin and...
QINGDAO BOCHENG INDUSTRIAL CO.,LTD
|
Red PTFE Extruded Rod , Temperature Resistance Glass Filled PTFE Rod
Red PTFE Rods PTFE extrusion rods Virgin PTFE Rod factory supply Glass Filled PTFE Graphite Filled PTFE 1: Description: PTFE (Polytetrafluoroethylene) Known as the gold standard, PTFE material is often the first choice for many advanced applications suc......
Kunshan Dehao Electronic Technology Co., Ltd
|
Heat Oil Resistant AS568 15% Glass Filled PTFE Gasket
...Glass Fiber PTFE Flat Round Gasket Size According To Drawings For Processing Description PTFE gasket, also named gasket, is made by cutting PTFE stick, pipe and sheet into flat shape. V shape gasket or valve annulus. It is anti-corrosive, anti-aging and not electric. PTFE PH value is among 0-14. it can have good mechanical strength at -100℃-100℃. The pressure is 10Mpa. Note: when the temperature is lower than -185℃. PTFE...
Zhenjiang Chunhuan Sealing Materials Co., Ltd.
|
Carbon filled PTFE gasket sheet ring disc can band sinter piston for shock absorbers
...filled PTFE ring disc can band sinter piston used in shock absorbers Specifications: properties unit result Apparent density g/cm3 2.10-2.30 Tensile strength(min) MPa 15.0 Ultimate elongation(min) % 150 Working Temp. ℃ -180~260 Melting point ℃ 327 Produce Max Temp. ℃ 385 Size mm 20mm~400mm 1. Low water absorption 2. Corrosion resistance 3. Temperature resistance Description: PTFE......
Ningbo WeiWo Electromechanical Tech Co.,Ltd.
|
glass fiber Filled PTFE ROD
glass fiber Filled PTFE ROD Chemical Properties: PTFE Products: PTFE ROD/PIPE: molded rod/pipe and extrusion rod/pipe PTFE SHEET: molded sheet and skived sheet PTFE FILM: directional, half directional, non-directive film PTFE TAPE/BALL/GASKET/SEAL/PUMP/......
Zhejiang Delong Teflon And Plastic Technology Co., Ltd
|
CLTE-XT Rogers PCB Board Ceramic Filled Woven Glass Reinforced PTFE Circuit Boards 25mil
... shown are just for reference) General Description The CLTE-XT laminates are composites of PTFE, woven fiberglass reinforcement, and micro-dispersed ceramic filler that are intended to increase loss tangent while preserving good dimensional stability and...
Bicheng Electronics Technology Co., Ltd
|