Categories | Floor Tile Adhesive |
---|---|
Model Number: | M720D |
Place of Origin: | shanghai |
MOQ: | 50 buckets |
Price: | negotiated price |
Payment Terms: | L/C, T/T, Western Union, MoneyGram |
Supply Ability: | 500000 buckets per month |
Delivery Time: | 1-10 days |
Packaging Details: | 25kgs /bucket |
Main Raw Material: | Acrylic |
density: | 1.1kg/L |
Names: | adhesives used to PVC flooring. |
Usage: | Construction |
Adhesives used to paste many kind of antistatic and static dissipative sheet PVC flooring M720D
Decentralized function-component static conductive adhesives for laving all types of static conductive or static dissipative PVC sheet flooring.
Construction Method:
Without dilution, please stir before use, and then use the appropriate B3 teeth scraping the glue evenly coated over the substrate surface. According to the construction site of the temperature and humidity, wait for about 5-10 minutes (more than 50% of the film becomes transparent) surface can be laid in mortar floor, then push plate with cork flooring flattened, with 50 kg of rolling device rolling on the paved floor, can achieve the best results. Please refer to the laying of the floor around the board company information.
Applicable Subfloor:
①A suitable porous absorbent, strong, dry, smooth, no cracks, no grease, no wax floor.
②For the hard cement-based self-leveling screed.
③For aerial wood flooring, plywood or particleboard cushion.
Feature:
Good tack early Large area coating Containing conductive carbon fibers
Construction is good Environmental protection
Primary Treatment:
Subfloor if oil, water and mold release wax , wax water decontamination required treatment ; minor sand from the ground suggested M318 water-based primer (porous absorbent subfloor ) bottoming closed; does not smooth ground recommend the use of flat subfloor self-leveling for leveling ( leveling thickness of at least 2mm); wet subfloor moisture treatment recommended by two component epoxy moisture primer. The presence of cracks is recommended to use two-component epoxy material subfloor repair.
Note:
If the temperature is below 15 ℃ construction or relative humidity greater than 75%, please consult our technical staff opinion. Do not glue dumped into sewers or drains. Unused glue should be sealed. Tools can be cleaned with water.
Packaging and Storage:
20kg plastic pails. The product should be stored at room 5℃-35℃, prevent freezing, exposure. Shelf life of 12 months.
Technical Parameters:
Color | Gray |
PH | 7-8 |
Density | 1.1kg/L |
Dosage | 120-180g/㎡ |
Waiting time | About 5-10 minutes (due to temperature and humidity vary) |
Construction time | After the completion of total waiting time, about 30-60 minutes (due to temperature and humidity vary) |
Load time | ≥72 hours |
Bleeder resistor | lower than 1x106 ohm |