On / Off Control , Presence Motion Detector , Lux-Off Function ,
220 ~ 240V Input
Simple ON/OFF control, using Dual-PD daylight sensor to
differentiate the natural light and artificial light.
Real Lux-Off function when used built inside the fixture. When
people comes, the sensor switches on the lamp, after chosen
Hold-time, sensor switches off the lamp.
Operating voltage: 220〜240V AC, 50Hz.
Rated load: 400W (capacitive)
Stand-by power: <0.5w.
Dual-processor technology, real Lux-Off function for built-in
Zero-cross point operation, protect the sensor relay against the
in-rush current, secure the max. load and life time of the relay.
Detection range up to 12m in diameter.
Mounting height: 3〜6m.
Operation temperature: -20℃ ~ +70℃ .
IP rating: IP20.
Hold-time means the time period to keep the lamp on 100% after
*when hold-time set as 3s, sensor enters into test mode, this test
mode is mainly for users to choose the desired detection range. In
this mode, the daylight sensor is disabled, when there is no
motion, fixture keeps off, when there is motion detected, fixture
keeps a cycle of 3s on and 2s off.
Daylight sensor means the daylight threshold to enable or disable
the sensor function.
"Disable”: The sensor works always, even during daylight.
"50lux, 25lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.