WEAR PROTECTION & WEAR RESISTANCE Impact Bar
Used in the conveyor loading points or transfer points to replace
traditional cushion rollers.
It’s designed to absorb impact loading and help eliminate spillage
and scattering of the products.
This results in less wear and tear on your conveyor system,
dramatically improves the efficiency
and reduces the maintenance cost.
The impact bar is composed of three different Layers. The top layer
is made of virgin UHMWPE
sheet for movement of the conveyor belt. The middle layer is made
of rubber to cushion the
impact load.While the lower layer is for fastening impact pads on to the main
which is usually made of aluminium. The impact bar is used in the loading
area of the belt
conveyor to replace the traditional cushion rollers. It's designed to absorb
which will dramaically reduce shock and stress loading on the structure.
Material: * Virgin UHMWPE sheet surface
* Shock absorbing rubber
* Extruded aluminium
1. Avoids the damage to the belt through the contact between the
bar and surface of belt.
2. The conveyor belt is stressed evenly in the loading area, which
will reduce the daily maintenance
cost. It effectively eliminates the spillage or scattering of the
material caused by inequality of the
stress on the belt.
3. The UHMW polyethylene surface has outstanding sliding
properties, to reduce the frictional
resistance to the minimum.
4. Ultra elastic rubber absorbs the impact in the maximum.
5. Each part of the impact bar is closely jointed by hot
6.“T-track” fastening device has different tightening points along
the bar and make the joining
strongand reliable, easy to install and remove.
Rubber Hardness (Shore A)
Coefficient of Surface Friction for UHMWPE
Surface Resistivity (Ω)
≤3.0 x 108
Flame Resistance Ability(Combustion by Alcohol Burner)
Average test time
Rubber & UHMWPE: 6.0
Rubber &"T-slot" extruded metal construction:6.0
Note: Flame Retardant Impact Bar–With quality approval on the
“Flame Resistant and Anti-static”
ability for Underground Coal Mine Industry, and got “Certificate of
Qualified Products” issued by
“China National Inspection & Supervision Center of Coal Mine
UHMWPE Thickness H2
A Type Impact Bars
15(Flame Retardant Bar)
B Type Impact Bars
Note: 1) Other dimensions in the diagram are respectively:C=36mm;
2) Customized sizes are available on request.
Dear friends, if you were interested in our products, please feel
free to contact me.
Thanks in advance.