Fireproof Dupont Nomex Material Protective Clothing FR Flame
Resistance EN1149 EN471
Nomex® ⅢA (93% Nomex®/5% Kevlar/2% Carbon) 6oz/yd²/210gsm
UK or US sizes from 36-64
This coverall is functional design, seven pockets for functionality
and all stress points on pants are bar-tack reinforced for
strength. Adjust waist by Loop and Velcro.
EN ISO 11612, EN1149, EN471, NFPA2112
Orange, Navy Blue, Royal Blue, Red, Yellow
- Two side pockets
- One pen pockets
- Action back at centre
- Permanent stitched-in front pleat
- Concealed two-way, brass zipper with snap closure
- Two chest pockets closed by hidden zipper
- Elasticized waistband
- Two back hip pockets in orange color
Service we supply
1) The new design and new materials are provided as your
2) We are pleased to be given a test order;
3) The OEM services are available;
4) One-stop service: Satisfy what you want;
If you have design want to make, we can do as follows:
1) You send us your design (samples or pictures or some ideas), so
that we could know what you want exactly;
2) We make the samples for you then send you the pictures and
samples by express;
3) As soon as you receive the samples and approve to us (if any
changes we will follow them), then you can place the order to us;
Care and Maintenance
*Wear only FR or non-melting undergarments (e.g. cotton, silk,
*Wash garments thoroughly after each wearing to remove
*Do not put on or take off the garment in proximity of flammable
gasses, vapors, dusts or in other potentially explosive
*In potentially explosive atmospheres, proper grounding procedures
must be used.
*Wear garments with the appropriate arc rating as dictated by an
electric arc hazard analysis. Consult employer if unsure.
FR clothing can only provide protection if the wearer follows
garment manufacturers' recommendations for proper use:
*Wear garments properly – collars closed, sleeves and cuffs down
and secured, shirt tails tucked, closures secured, and other
*Wear looser-fitting garments that provide adequate mobility.
*Do not wear non-FR clothing over FR garments. The outermost layer
must be FR
Most flame-resistant garments can be handled safely using common
laundering and care procedures. However, a few precautions must be
followed to ensure your FR garments maintain their maximum
effectiveness. Remember: FR clothing is safety equipment that just
might save your life. It is imperative to make sure your FR
garments are properly cleaned and maintained.
Carefully follow the manufacturer's care label when laundering FR
garments. Many FR fabrics require mild wash and dry conditions to
maximize the life of the garment.
*Make sure FR garments are clean and in proper repair before each
*Remove oils and flammable contaminants from FR garments. Flammable
contaminants can be a fuel source that adds to burn injury.
*Repair garments using "like materials." Use FR fabric, thread and
components. Return garments to the manufacturer for repair, or use
an authorized FR repair facility.
*Wash new flame-resistant garments prior to wearing.
*Wash flame-resistant garments separately from standard clothing.
*Do not use chlorine bleach.