400V 3 Phase Stainless Steel Electric Sauna Heater 21.0kw ,
Sauna Heater Quick Detail:
- Model:TOLO-H210 with out control
- Power: 21.0kw
- Electric heater type: electrical heater
- Heating element: heat element
- Installation: Freestanding
- Use: sauna room
- Suit for sauna room volume: 28~40m³
- Voltage: 400v/3 phase
- Stone volume: ~40kg
- 1-8 hour pre-selected time setting and 1-4 hour working time under
- Maximum 12 hours working time under B model
- Controller: digital out/wall mounted controller
- Shell material: sus304
- Parts: control box and digital control panel
20 feet container can load: 96pcs 25.0kw sauna heater
40 feet container can load: 192pcs 25.0kw sauna heater
40HC container can load: 243pcs 25.0kw sauna heater
21kw/380v/50Hz/60Hz/3phase Mirror-polished Stainless Steel Electric
Sauna Heater , Heavy duty
TOLO sauna heater kilowatt range: 3.0kw, 4.5kw, 6.0kw, 8.0kw,
9.0kw, 10.5kw, 12.5kw, 15.0kw, 18.0kw, 21.0kw and 25.0kw. Or
customized by your requirement.
A work mode: when indicator light “A” is on, it is work mode A, running time
(Heater running) is four hours, maximum unworking time (Means the
heater is not working) is eight hours. e. g. The time indicates
4:00 as a divided line, the heater’s running time is 4:00-0:00 ;
unworking time is 12:00-4:00 and heater doesn’t work. If you don’t
want to start the heater at once (delay 2 hours to automatically
start heater). The time is set at 6:00.
B work mode: when indicator light “B” is on, the heater straightly enter into
normal work state (no unworking time ), the operation time can last
Remark : 1) The time of setting about work mode A and B are all 0:30
2) Unworking time of work mode A can’t below work time 4:00,
otherwise it don’t allow presetting time.
3) The time is indicated count down.
- Mirror-polished Stainless Steel shell .
- We use low voltage controller and separate electrical box bring
- Large and improved time display screen showing temperature in
Centigrade or Fahrenheit according to the customer's preference
- The temperature can adjusted from 50-110 centigrade or 122-230
Fahrenheit Sauna heater will Sequential heating according the
detected sauna room temperature and the setting temperature. It
save energy and prolong the main parts' life.
- Customer can preset the working time and the waiting time in A and
B model. Under A model, user can set waiting time from 0 to 8
hours. When the time count down to zero, it will switch to B model
automatically and works as the setting under B model
- Under B model, user can set working time from 30 minutes to 12
hours or no time limited.
- Large and improved time display screen showing time in hours
- Extra switch for sauna room lamp
- High temperature cut-off for both sauna room and sauna heater.
Double safety protection
For dry type sauna room in hotel and chamber commercial use
TOLO sauna heater specifications:
Output power kW
Power supply 50/60Hz
Power wire (copper)N*mm2
Gross weight kg
We test strictly before deliver the good.
1. CE standard, interlock function
2.double safety protection system sauna heater
3.low voltage controller + electrical box.