Pulse Jet PPS Dust Collector Filter Bags For High Temperature Dust
PPS filter bag Ryton filter bag for Thermal power plant dust
Dust filter bags PPS ,Ryton filter bag Detail discription .
PPS filter bags are made of 100% PPS fiber ,it is the best choice
for thermal power dust collector , which are of ryton filter bags,
dust collector filter bags or dust collection filter bags.
Being ryton filter bags, PPS filter bags are widely used in themal
power industry, cement industry, chemical industry,Iron and steel
industry, Aluminum industry , etc.
PPS filter bags features anti-high temperature ,excellent
anti-anrasion, good anti-acid and good anti-alkali .
1. With high tensile strength and low tensile elongation
2. Applied in continuous temperature 190℃ , works well .
3. As dust collector filter bags, it is largely used in thermal
4. With good air permeability and also can be adjusted by
customers' specific request
5. Being dust collection filter bags, they are installed in
baghouse and with high-efficiency filtration .
Working principle :
1. Material :with100% pps fiber
2. Scrim: with pps staple yarn
3. Finish treatment with singeing, calendering and heat setting.
4. Air permeability (l/m2/s): 150～300
5. Temperature (℃): Continue: 190, Instant: 220
Function of several dust filter bags
Dust collector filter bag
Resistance to Acids
Resistance to Alkalis
Resistance to Oxidation
PP filter bag
Acrylic filter bag
Polyester dust filter bag
PPS filter bag
Polyimide filter bag
PTFE 100% filterbag
Fiberglass Filter bag
Filter bags, dust collector bags, dust bags, filter socks, bags,
tubes, socks - they all mean the same thing: An industrial grade
fabric filter made from heavy duty material, all textile based,
used in dust collecting systems, in either process filtration or
The main type of dust filter bags including Nomex filter bag ,PPS
filter bags ,P84 filter bag ,PTFE filter bags ,Acrylic filter bags
,Polyester filter bags,dust filter bag ,bag filters,dust collector
Dust bags come in 5 basic designs:
Pulse jet bags (bottom loader or bottom removal)
Pulse jet bags(top loader or top removal)
Reverse air design
Pulse jet bags PPS filter bag Ryton filter bag are cleaned using
compressed air to mechanically "pulse" or snap the bag periodically
so that the built up filter cake is discharged and the flow through
the media is returned to its higher air permeability.Ryton filter
bag ,PPS filter bag are all belong to Pulse jet bags.They are are
installed on wire cage supports and filter from the outside/ in. In
the bottom load design, bags are pre-installed on their cages and
then attached to a mounting thimble or cup which hangs down from
the underside of the tube sheet. The tube sheet is a metal plate
with regularly spaced holes which serves as the top of the gas
tight metal box known as a dust collector. The top edge of the
bottom loading bag is normally tucked into the cage and the entire
assembly is attached to the thimble or cup with a hose clamp.
Installation of bottom loading bags Coal fired boiler filter bag
PPS is more difficult because of being on the dirty side of the
collector and having no catwalks or surfaces on which to stand.
Some bottom loaders are on the top of large storage bins on tall
silos which make installation potentially dangerous. Bottom loader
collectors are frequently used when headroom above the collector is
not adequate for top removal design bags.
Bottom loading bags are less expensive than comparable size top
loaders because the top is plain with no special attachment
We are PPS filter bag ,Ryton filter bag manufacturer .
Nomex filter bag for Asphalt mixing plant smoke filtration
P84 dust filtr bag for Cement kiln smoke and gas filtration
PTFE 100% dust filter bags for waste incinerator gas filtration.