4 In 1 Bluetooth GPS Car Holder

4 In 1 Bluetooth GPS Car Holder

Inquire Now

Description:

HI-701 BT 4 in 1 car holder is a complete PDA car holder solution with the following functions:1. Charging and supply power to the PDA
2. Amplifying the PDA sound
3. Making the PDA as a GPS or
Bluetooth GPS enable unit
4. Holding the PDA in carBy changing the PDA base connector on the holder, almost any type of PDA can be an independent and complete GPS PDA.HI-701 BT advantages:Almost any type of PDA can be used with the 4 in 1 car holder by using suitable base connector. User can only change the base connector when he changes his PDA. User can also use different kinds of PDA with the same car holder.
Taking the GPS signal from the hinged GPS receiver back card from the back of the holder the PDA become a complete GPS enable PDA. The attached GPS receiver can also act as an independent GPS mouse by using different kinds of connecting cables.
HI-701 BT + GPS version make the PDA GPS enable wire or wirelessly
Accessories: Standard Accessories:HI-701 BT 4 in 1 car holder
PDA base connector (one type)
DC 12V Cigarette lighter power cable (compatible from DC12V to DC24V)
Hinged Bluetooth GPS receiver back card
Audio cable
Suction cup car mount
Installations:GPS receiver installation:
Slide the inclusive Bluetooth GPS receiver into the back of the car holder so that the PCB golden finger insert and contact properly into the female connector inside. Based on the most powerful and recent SiRF StarIII ultra high sensitive GPS receiver module, the receiver can get satellite signal in very poor reception environment. Beside, the inclusive Bluetooth GPS receiver is come with a hinge design and can be folded from 0 to 180 degree to adjust the best reception angle.LED Indicator (Red)LED off Receiver switch off
LED flashing GPS Position Fixed
LED stay on GPS Signal searchingLED Indicator (Blue)LED off Bluetooth switch off
LED flashing Bluetooth searching
LED stay on Bluetooth connectedGPS Receiver
SpecificationChipset SiRF Star IIIInterfaces PCB golden finger & Mini-1394Protocol
NMEA0183 GGA, GSA, GSV, RMC, GLLBaud Rate 4800, N, 8, 1Max. Update Rate
1 HzDatum
WGS84Channel
20 channelFrequency
L1, 1575.42MHzHot Start
8 sec. AverageWarm Start
38 sec. AverageCold Start
48 sec. AverageReacquisition Tike
100 msPosition Accuracy
15m 2D RMS, SA offMacimum Altitude
18,000mMaximum velocity
515m/sVoltage
DC 3.3V+10%Power consumption
90mA continuous modeAntenna Type
Built-in active antennaExternal Antenna Connector
MMCX (Optional)Dimension
Fold: 79 (L) x 60 (W) x 26 (H)mm
Unfold: 132 (L) x 60 (W) x 26 (H)mmLED Indicator:
3D Positioning (blinking) or
Searching GPS (on)Bluetooth Specifications:
Bluetooth V1.1 Compliances
Frequency Range: 2.4 ~ 2.4835 GHz
unlicensed ISM bandInterfaces USB/UART/SPIReceiver Sensetivity:
-80 dBm @ 0.1% BERTransmitting Power: Class 2 -6 dBm ~ +4 dBmRF Input Impedance:
50 ohmsFrequency hopping:
1600hops/sec.Baseband Crystal OSC:
16MHzData Rate:
Up to 723Kb/sOperating Temperature:
-20C +80CStorage Temperature:
-30C +90CTransmitting Range:
10 meters (Typical)Power Consumption:
65 mA (Typical)
PDA base connector
installation:
Insert the base connector in the front-lower part of the car holder. Make sure the PDA base connector is compatible to the PDA that you using.

4 In 1 Bluetooth GPS Car Hold